The artificial plant wall refers to installing the artificial plant on the wall surface to achieve a kind of beautification of the wall surface and vertical greening effect. Referred to as the artificial plant wall, this product can be widely used in homes, villas, hotels and other places. Let's take Mingzhu's artificial plant wall as an example to introduce how to install it on the wall!
Tools / raw materials
Simulation plant wall products
Steel frame
Hammer
Electric hammer
Expansion screw
wrench
scaffold
Cable tie
Method / Step
Step 1: Install steel mesh according to the size of the wall
1. Paste the steel mesh on the wall
2. Use an electric hammer to punch holes in a suitable position
3. Insert the expansion screw and enter it with a hammer
4. Cover the nut with a wrench and fix the steel mesh on the wall
Step 2: Simulate the splicing of plant wall products
1. According to the area of the wall, stitch the products together in the same direction
The back of the product is as shown
Step 3: roll up the product
This step is to facilitate installation, the width of the general splicing is 1 meter, and the length is determined according to the height of the wall.
Step 4: Fix the product on the wall
1. With the help of a scaffold, put the rolled artificial plant wall product down from the upper end of the wall.
2. Adjust the product to fit the steel mesh
3. Fix the product on the steel mesh with cable ties
Precautions
There are buttons similar to letter buttons between the products, one side is convex and the other side is concave, and the splicing is to keep the same direction
